Introduction: Selecting the Right Fluted Drilling Tooth for Foundation Construction
Choosing the right cutting tools is an important part of efficient foundation drilling. Abrasive soil, compacted formations, and sticky materials can increase tooth wear, affect excavation performance, and lead to frequent tool replacements.
The 3050CF-19 Fluted Drilling Tooth from ZORKAI is a wear-resistant rotary drilling bullet tooth designed for compatible foundation drilling equipment operating in abrasive and mixed ground conditions.
Featuring a Ø19mm tungsten carbide tip, forged alloy steel construction, and a longitudinal fluted cutting head, the 3050CF-19 combines a replaceable cutting structure with a design intended to improve material clearance.
This guide explains the technical specifications, design features, suitable geological conditions, and important selection considerations for the 3050CF-19 rotary drilling tooth.
If you are already looking for this specific model, visit our 3050CF-19 Rotary Drilling Bullet Tooth Product Page for product information and purchasing inquiries.
What Is the 3050CF-19 Fluted Drilling Tooth?
The 3050CF-19 is a replaceable cutting tooth designed for rotary drilling attachments used in bored pile foundation construction.
Its main cutting element is a tungsten carbide insert supported by a forged steel body.
The distinguishing feature of this model is its longitudinal fluted head, which incorporates grooves along the outer surface.
These grooves provide additional space for excavated material to move around the cutting head during drilling.
Compared with conventional smooth-head cutting teeth, the fluted geometry may offer advantages in certain sticky or abrasive formations.
The model belongs to ZORKAI’s range of Wear-Resistant Rotary Drilling Bullet Teeth, developed for different foundation drilling applications.
Technical Specifications of the 3050CF-19
Understanding the technical specifications helps contractors and equipment distributors select the correct replacement tooth for their drilling attachments.
| Parameter | Specification |
|---|---|
| Product Model | 3050CF-19 |
| Product Type | Fluted Rotary Drilling Bullet Tooth |
| Carbide Tip Diameter | Ø19 mm |
| Head Diameter | Ø50 mm |
| Shank Diameter | Ø30 mm |
| Collar Diameter | Ø38 mm |
| Gauge Length | 80 mm |
| Overall Length | 140 mm |
| Body Material | Forged 42CrMo Alloy Steel |
| Body Hardness | HRC 48–52 |
| Cutting Head | Longitudinal Fluted Design |
| Typical Equipment | Compatible Drilling Buckets, Augers and Core Barrels |
These dimensions are important for confirming compatibility with existing drilling tooth holders.
Before placing an order, contractors should verify the shank dimensions, retaining system, holder condition, and operating requirements.
Key Design Features of the 3050CF-19
1. Longitudinal Fluted Head for Material Clearance
The fluted cutting head is one of the main characteristics of the 3050CF-19.
During drilling, excavated materials may collect around the steel body of conventional cutting teeth, particularly in sticky clay or mixed soil formations.
The longitudinal grooves are intended to provide additional clearance around the cutting head.
Potential benefits include:
- Reduced material accumulation around the tooth head
- Improved clearance for loose soil and drilling debris
- More consistent exposure of the cutting point
- Reduced localized material contact under suitable conditions
The actual benefit depends on soil properties, drilling speed, equipment configuration, and tooth arrangement.
2. Ø19mm Tungsten Carbide Cutting Tip
The 3050CF-19 incorporates a Ø19mm tungsten carbide tip for cutting contact with soil and suitable rock formations.
Tungsten carbide is commonly used in rotary drilling teeth because it offers high hardness and resistance to abrasive wear.
The carbide insert performs the primary cutting action, while the alloy steel body provides structural support.
The correct carbide grade and cutting geometry should be selected according to the expected geological conditions.
3. Forged 42CrMo Alloy Steel Body
The cutting tooth uses forged 42CrMo alloy steel with a specified body hardness of HRC 48–52.
When appropriately heat-treated, 42CrMo steel provides a combination of mechanical strength, toughness, and wear resistance.
These characteristics are important for replaceable drilling teeth exposed to repeated mechanical loads during foundation construction.
4. Extended 80mm Gauge Length
The 3050CF-19 has an 80mm gauge length and a total length of 140mm.
The extended cutting profile can be useful in certain drilling configurations where tooth exposure and cutting clearance are important.
However, overall length and cutting geometry must be compatible with the drilling attachment.
A longer cutting tooth does not automatically provide better drilling performance in every geological condition.
5. Replaceable Self-Rotating Design
The 3050CF-19 is intended for installation in a compatible rotary drilling tooth holder.
When the tooth rotates correctly inside its holder, wear may be distributed more evenly around the cutting head.
Correct installation, regular holder inspection, and suitable retaining components are important for maintaining performance.
ZORKAI also supplies related Rotary Drilling Pick Seats and Holders for foundation drilling attachments.
Suitable Geological Conditions for the 3050CF-19
Selecting drilling teeth according to geology is essential for efficient foundation construction.
The 3050CF-19 is intended primarily for abrasive soil and selected mixed-ground applications.
Sandy and Abrasive Formations
Sand and abrasive soil can cause progressive wear on cutting teeth.
The tungsten carbide insert and alloy steel body provide a cutting structure suitable for consideration in these applications.
The fluted head also offers additional clearance around the steel cutting section.
Sticky Clay and Mixed Soil
Sticky clay can accumulate around drilling teeth and interfere with the cutting process.
The longitudinal grooves of the 3050CF-19 are designed to create clearance paths around the cutting head.
This design may help reduce material buildup under suitable operating conditions.
Compacted Soil and Weathered Formations
The 3050CF-19 may also be considered for certain compacted or weathered ground conditions, depending on the formation strength and drilling parameters.
For highly abrasive or hard rock applications, heavier cutting teeth with larger carbide inserts or reinforced cutting heads may be preferable.
Explore additional Rotary Drilling Bullet Teeth to compare suitable alternatives.
Applications of the 3050CF-19 in Foundation Drilling
The 3050CF-19 can be used on compatible drilling attachments where its cutting geometry and holder dimensions are suitable.
Rotary Drilling Buckets
Rotary drilling buckets are widely used in bored pile foundation construction.
They collect excavated soil and rock material during rotary drilling operations.
Suitable cutting teeth improve the bucket’s ability to penetrate specific ground formations.
Browse ZORKAI’s Rotary Drilling Buckets for related foundation drilling equipment.
Drilling Augers
Drilling augers use cutting teeth positioned around the cutting edge and helical flights.
The 3050CF-19 can be considered for augers equipped with compatible tooth holders.
Ground conditions and tool geometry should be evaluated before installation.
Core Barrels
Core barrels are used in foundation construction to cut annular sections in rock and hard ground.
The cutting teeth are arranged around the bottom cutting ring according to the barrel design.
Depending on geological conditions, different carbide tip sizes and tooth profiles may be required.
How to Choose the Right Rotary Drilling Bullet Tooth
The selection process should consider the geological formation, drilling attachment, cutting tooth dimensions, and expected operating conditions.
Step 1: Identify Ground Conditions
Determine whether the project involves clay, sand, gravel, compacted soil, weathered rock, or mixed formations.
This information helps identify the appropriate cutting head design and carbide configuration.
Step 2: Confirm Tooth Holder Compatibility
The 3050CF-19 has a Ø30mm shank and Ø38mm collar.
The existing holder must be compatible with the tooth dimensions and retention system.
Step 3: Compare Cutting Head Designs
Smooth-head, fluted, hardfaced, and reinforced bullet teeth may perform differently in various geological conditions.
For abrasive or sticky formations, fluted cutting teeth may be worth evaluating.
For hard rock applications, additional carbide protection or a larger carbide tip may be required.
Step 4: Evaluate Replacement and Maintenance Costs
The purchase price is only one part of the drilling tool’s operating cost.
Contractors should also consider tooth wear, holder condition, replacement frequency, downtime, and drilling efficiency.
A suitable cutting tooth may help reduce unnecessary tool replacements and improve overall equipment productivity.
Why Choose ZORKAI for Foundation Drilling Tools?
ZORKAI is a China-based supplier specializing in foundation drilling tools, construction machinery consumables, and related drilling equipment.
We supply products for foundation contractors, drilling equipment distributors, and construction companies across international markets.
Our product portfolio includes:
- Rotary Drilling Bullet Teeth
- Wear-Resistant Drilling Teeth
- Rotary Drilling Buckets
- Auger Cutting Teeth
- Foundation Drilling Tools
- Drill Rigs and Related Equipment
We serve customers in Central Asia, the Middle East, Southeast Asia, Europe, and other regions.
Our team helps customers review drilling equipment requirements and identify suitable product options for different geological conditions.
Visit our Foundation Drilling Tools Product Category to explore additional drilling products.
Frequently Asked Questions About the 3050CF-19
What is the 3050CF-19 drilling tooth used for?
The 3050CF-19 is a replaceable fluted rotary drilling bullet tooth used on compatible foundation drilling buckets, augers, and core barrels.
What is the difference between fluted and standard bullet teeth?
Fluted bullet teeth incorporate longitudinal grooves around the cutting head, which are designed to provide additional clearance for excavated material. Standard smooth-head teeth use a different outer profile.
What is the carbide tip diameter of the 3050CF-19?
The model features a Ø19mm tungsten carbide tip.
Is the 3050CF-19 suitable for hard rock?
Its suitability depends on rock strength, abrasiveness, impact loading, and drilling configuration. For demanding hard rock formations, a heavier-duty cutting tooth may be more appropriate.
Can the 3050CF-19 fit any rotary drilling rig?
Compatibility depends on the drilling attachment and tooth holder, not only the drilling rig brand. The holder dimensions and retention system must be verified.
Where can I buy 3050CF-19 fluted drilling teeth?
ZORKAI supplies the 3050CF-19 and related foundation drilling tools from China. Customers can submit technical requirements and order quantities through our website.
Contact ZORKAI – Request a Quote for 3050CF-19 Drilling Teeth
Looking for reliable 3050CF-19 Fluted Rotary Drilling Bullet Teeth for your next foundation construction project?
ZORKAI welcomes inquiries from foundation contractors, drilling equipment distributors, and machinery buyers worldwide.
For a quotation, please provide the following information:
- Product model: 3050CF-19
- Required quantity
- Drilling equipment model
- Geological conditions
- Destination country
- Additional technical requirements
ZORKAI Contact Information
Website: www.drillbitsup.com
Email: sales@drillbitsup.com
WhatsApp: +86 178 4467 3571 / +86 199 8201 5501
Contact Form: Contact ZORKAI – Request a Quote
Product Details: 3050CF-19 Rotary Drilling Bullet Tooth
Contact ZORKAI today for product specifications, available configurations, and quotation assistance.





