BF70 Bucket Tooth Guide: Applications, Working Principle & Selection Tips

Selecting the right cutting teeth is an important part of improving drilling efficiency in foundation construction. Different geological formations require different cutting geometries, tool configurations, and wear-resistant components.

The BF70 bucket tooth is a flat cutting tooth used in selected rotary drilling bucket applications. Its wide cutting edge is designed to engage suitable ground formations through scraping and shearing rather than the concentrated point-cutting action typically associated with bullet teeth.

But how does a BF70 flat tooth work? What types of ground conditions is it suitable for? And how can contractors determine whether BF70 is appropriate for their drilling buckets?

In this guide, ZORKAI, a foundation drilling equipment and machinery supplier based in China, explains the design, applications, selection considerations, and maintenance of BF70 rotary drilling bucket teeth.

1. What Is a BF70 Rotary Drilling Bucket Tooth?

A BF70 rotary drilling bucket tooth is a replaceable flat cutting component used in suitable foundation drilling tools.

Unlike pointed rotary drilling bullet teeth, a flat bucket tooth has a relatively wide cutting profile designed to scrape, shear, and loosen material.

The cutting teeth are installed along the working edge of a drilling bucket, helping excavate material as the bucket rotates.

Typical applications include:

  • Clay and cohesive soil excavation
  • Sand and selected compacted soil formations
  • Foundation pile borehole construction
  • Suitable weak or weathered formations
  • Selected soil drilling bucket configurations

The actual application range depends on the tooth design, cutting-edge material, drilling tool arrangement, and geological conditions.

For more information about related equipment, explore ZORKAI Foundation Drilling Tools.

2. Understanding the BF70 Bucket Tooth Design

The BF70 flat tooth features a broad cutting face, steel body, and mounting shank.

Based on the supplied product drawing, the illustrated BF70 tooth has the following dimensions:

ParameterDimension
ModelBF70
Overall Length162 mm
Main Body Height100 mm
Cutting-End Width70 mm
Tooth TypeFlat Bucket Tooth
ApplicationCompatible rotary drilling buckets

These dimensions describe the illustrated component. Additional mounting measurements and tolerance requirements should be checked before replacement.

Wide Cutting Edge

One of the distinguishing features of flat bucket teeth is their relatively broad cutting edge.

This design distributes cutting contact over a wider area compared with pointed bullet teeth.

For suitable soils, the cutting geometry can support scraping and shearing during bucket rotation.

Steel Tooth Body

The tooth body supports the cutting edge and transfers operating loads to the mounting system.

Material selection, manufacturing quality, and heat treatment influence the component’s ability to withstand impact and wear.

The exact steel grade should be confirmed through the applicable technical specification.

Wear-Resistant Cutting Elements

Many flat drilling teeth use tungsten carbide inserts or other wear-resistant cutting elements along their working edges.

These components help resist abrasion during suitable drilling operations.

The location, grade, and configuration of wear-resistant elements vary by manufacturer and tooth model.

Mounting Shank and Retention System

The mounting section connects the cutting tooth to its compatible holder.

Proper fitment is essential for maintaining the intended cutting position and preventing excessive movement.

Before replacing a tooth, verify its mounting interface rather than relying on the BF70 name alone.

3. How Does a BF70 Flat Bucket Tooth Work?

During rotary drilling, the drilling bucket rotates while applying cutting force to the ground.

The installed teeth contact the soil and help separate material from the surrounding formation.

A typical drilling cycle includes:

Step 1: Positioning the Drilling Bucket

The rotary drilling rig lowers a compatible drilling bucket into the borehole.

Step 2: Engaging the Ground

The cutting teeth contact the soil as the drilling bucket rotates.

Step 3: Cutting and Loosening Material

The flat cutting edges scrape or shear suitable material.

Step 4: Collecting Excavated Soil

The bucket collects loosened material according to its design.

Step 5: Removing Excavated Material

The drilling rig lifts the bucket and discharges the excavated material.

The overall drilling performance depends on the ground conditions, bucket design, cutting tooth arrangement, available machine torque, and operating method.

A correctly selected cutting tooth helps the bucket perform its intended cutting function.

4. What Ground Conditions Are Suitable for BF70 Bucket Teeth?

Geological conditions are one of the most important factors in cutting tooth selection.

Although flat bucket teeth are used in many soil drilling applications, their suitability is not the same for every formation.

Clay and Cohesive Soil

Flat bucket teeth are commonly considered for suitable cohesive soil formations.

Their cutting geometry can help scrape and shear clay during drilling.

However, sticky material may affect bucket filling and discharge performance.

Sand and Compacted Soil

BF70-style flat cutting teeth may be considered for suitable sandy or compacted soil applications.

Tool performance depends on grain size, density, moisture conditions, and abrasion characteristics.

Weak and Weathered Formations

Certain weak or weathered formations may be excavated using suitable flat-tooth drilling arrangements.

Nevertheless, abrasive or increasingly hard material can accelerate cutting-edge wear.

Gravel and Hard Rock

For gravel-rich layers, cobbles, and hard rock, alternative cutting systems may be more suitable.

Pointed bullet teeth, specialized rock buckets, or core barrels can be considered according to geological and machinery requirements.

Contractors should avoid assuming that a flat bucket tooth is suitable for all rock formations.

5. BF70 Flat Teeth vs. Rotary Drilling Bullet Teeth

Flat bucket teeth and bullet teeth are both important components in foundation drilling, but their cutting principles differ.

FeatureBF70 Flat Bucket ToothRotary Drilling Bullet Tooth
Cutting ProfileWide, flat cutting edgePointed cutting tip
Typical Cutting ActionScraping and shearingConcentrated penetration and chipping
Common ApplicationsSuitable soil and softer groundMixed ground, gravel, weathered rock, and selected harder formations
InstallationCompatible flat-tooth holderCompatible bullet-tooth holder
Wear CharacteristicsEdge wear and abrasionTip wear, head wear, and impact damage
Selection PrioritySoil type and cutting geometryFormation strength, impact, abrasion, and tool design

Neither cutting system is universally better.

The correct choice depends on geological conditions, drilling machine capabilities, cutting tooth configuration, and the intended drilling method.

For drilling operations involving more demanding formations, explore ZORKAI’s Rotary Drilling Bullet Teeth.

6. How to Choose the Right BF70 Bucket Tooth

Selecting a suitable BF70 flat tooth requires more than matching the nominal cutting width.

Check the Original Tooth Dimensions

Measure the existing tooth and compare its dimensions with the replacement component.

Important details include:

  • Overall tooth length
  • Cutting-edge width
  • Mounting shank dimensions
  • Retention hole and locking arrangement
  • Tooth body geometry
  • Cutting-edge orientation

The illustrated BF70 tooth is marked with a 70 mm width, 100 mm main body height, and 162 mm overall length.

However, complete installation compatibility requires additional measurements.

Confirm Holder Compatibility

The tooth holder must securely support the cutting tooth.

Incorrect matching can contribute to excessive movement, premature wear, or damage to the mounting system.

Contractors should verify the existing holder dimensions and retention arrangement before selecting replacement teeth.

Consider Geological Conditions

Determine whether the project mainly involves clay, sand, compacted soil, gravel, weathered rock, or hard rock.

The cutting tooth should match the expected excavation conditions.

Evaluate Wear Resistance

Wear-resistant cutting elements can be important where abrasive materials are present.

However, carbide grade, insert configuration, tooth geometry, and operating loads all influence wear performance.

Compare Operating Costs

When evaluating different cutting teeth, contractors should consider replacement frequency, downtime, cutting efficiency, and compatibility.

The lowest initial tooth cost does not necessarily produce the lowest operating cost.

7. BF70 vs. BF72 vs. BF80 Bucket Teeth

BF70, BF72, and BF80 are model names used for flat cutting teeth in foundation drilling applications.

These products may differ in cutting-edge dimensions, body geometry, mounting interfaces, and intended applications.

ModelGeneral CategoryKey Selection Considerations
BF70Flat Bucket ToothCutting geometry, mounting compatibility, soil conditions
BF72Flat Bucket ToothExact dimensions, cutting configuration, holder fitment
BF80Flat Bucket ToothTool geometry, compatible holder, operating requirements

The numbers in model names should not be used as the sole basis for confirming dimensions or interchangeability.

Different manufacturers may use different specifications and naming conventions.

Before substituting one model for another, contractors should compare engineering drawings, holder interfaces, and the intended drilling bucket arrangement.

For related equipment categories, browse ZORKAI Products.

8. Common BF70 Bucket Tooth Wear Problems

Cutting teeth are consumable components exposed to continuous abrasion and mechanical loading.

Understanding common wear patterns can help contractors identify maintenance requirements.

Cutting Edge Wear

Gradual cutting-edge wear is expected during normal operation.

Excessive wear may reduce the tooth’s cutting effectiveness.

Chipped Cutting Elements

Hard inclusions, impact loads, or unsuitable drilling conditions may contribute to cutting-edge chipping.

Damaged teeth should be inspected and replaced when necessary.

Loose Tooth Installation

Excessive movement between the tooth and holder can result from worn interfaces or damaged retention components.

The tooth and holder should be inspected together.

Uneven Tooth Wear

Uneven wear across a drilling bucket may indicate differences in tooth positioning, geological conditions, or cutting load distribution.

The entire cutting arrangement should be checked rather than replacing only one tooth without investigation.

Practical Maintenance Recommendations

  • Inspect cutting teeth before drilling operations.
  • Check the condition of tooth holders and locking components.
  • Replace excessively worn or damaged teeth.
  • Monitor uneven cutting-edge wear.
  • Verify that replacement teeth match the original installation system.
  • Follow the drilling tool manufacturer’s maintenance instructions.

Routine inspection helps maintain the intended cutting arrangement and identify potential problems early.

9. How BF70 Bucket Teeth Fit into Foundation Drilling Systems

A rotary drilling bucket is part of a complete foundation drilling system.

Its performance depends on the interaction between the drilling machine, drilling tool body, cutting teeth, holders, and geological conditions.

For example, a properly matched bucket cutting arrangement can support efficient excavation in suitable soil formations.

However, changing to harder geological conditions may require different cutting teeth or a completely different drilling tool.

ZORKAI provides information and sourcing options for foundation drilling tools, including cutting teeth, drilling buckets, and related equipment.

Explore our Foundation Drilling Equipment and Tools to learn about related product categories.

10. ZORKAI Foundation Drilling Tools for International Projects

ZORKAI is an engineering machinery and foundation drilling equipment supplier based in Chengdu, Sichuan Province, China.

Our business focuses on foundation drilling tools, rotary drilling cutting teeth, drilling equipment, and related construction machinery.

We serve customers in international markets including Central Asia, the Middle East, Southeast Asia, and Europe.

Different projects may require different cutting tooth configurations depending on local geological conditions and drilling methods.

When selecting BF70-style flat bucket teeth, customers should provide the existing tooth model, technical dimensions, holder details, drilling bucket type, and expected ground conditions.

This information can help clarify suitable product options and reduce compatibility uncertainty.

11. Frequently Asked Questions About BF70 Bucket Teeth

What is a BF70 bucket tooth?

A BF70 bucket tooth is a flat cutting tooth used in compatible rotary drilling buckets. Its relatively wide cutting edge supports scraping and shearing in suitable geological formations.

Is BF70 suitable for hard rock drilling?

BF70-style flat teeth are generally more appropriate for suitable soil and relatively softer formations. Hard rock drilling may require specialized cutting systems such as bullet teeth or core barrels.

What is the difference between BF70 and a bullet tooth?

BF70 is a flat cutting tooth designed primarily around a wide cutting edge, while a bullet tooth has a pointed tip that concentrates cutting force into a smaller contact area.

Can BF70 teeth fit any rotary drilling bucket?

No. Tooth dimensions, holder geometry, retention systems, and cutting arrangement must match the specific drilling bucket.

What dimensions should I check before replacing BF70 teeth?

Check the overall length, cutting width, mounting shank, retention features, and other interface dimensions against the original component.

How often should BF70 teeth be replaced?

Replacement frequency depends on soil abrasiveness, operating hours, tooth material, cutting loads, and actual wear condition. Teeth should be replaced when they no longer meet the equipment’s serviceability requirements.

Can BF70 and BF80 bucket teeth be used interchangeably?

Not automatically. Their dimensions and mounting arrangements must be verified before substitution.

Conclusion: Selecting BF70 Bucket Teeth for the Right Drilling Conditions

The BF70 rotary drilling bucket tooth is an important flat cutting component used in suitable foundation drilling bucket applications.

Its wide cutting geometry makes it relevant to soil excavation operations where scraping and shearing are the intended cutting actions.

However, selecting the correct tooth requires attention to geological conditions, cutting-edge design, holder compatibility, and operating requirements.

For contractors working in Central Asia, the Middle East, Southeast Asia, or Europe, understanding these factors can help support more informed drilling tool selection.

Need Help Selecting BF70 Bucket Teeth for Your Project?

ZORKAI can discuss your cutting tooth requirements based on the drilling bucket type, tooth dimensions, holder configuration, and geological conditions.

Explore our Foundation Drilling Tools and Cutting Teeth or visit the ZORKAI website to learn more about related drilling equipment.

Contact ZORKAI to discuss your project requirements and request information about suitable drilling tool options.

Product Enquiry